Vacuum Tubing
Accuflow Systems Saint-Gobain Tygon Tubing, 3/8 in I.D., 5/8 in O.D.
High-purity, textile-reinforced thermoplastic tubing designed for pressurized fluid transfer. The tubing features a smooth inner bore to preserve product integrity and is suitable for laboratory, pharmaceutical, and industrial fluid-handling applications.
- High-purity thermoplastic construction.
- Textile reinforcement for increased pressure resistance.
- Inner diameter 3/8 in (9.5 mm).
- Outer diameter 5/8 in (15.9 mm).
- Wall thickness 1/8 in (3.2 mm).
- Length 50 ft (15.2 m).
- Smooth inner bore to minimize fluid interaction.
Accuflow Systems Saint-Gobain Tygon E-1000 Tubing, 3/8 in ID, 50 ft
Saint-Gobain Tygon E-1000 ultra-soft laboratory tubing engineered for peristaltic pumps and complex laboratory setups. The tubing is a clear, non-DEHP thermoplastic elastomer that remains flexible at very low temperatures, resists twisting and collapse, and exhibits low resistance to compression for low-torque or battery-driven peristaltic pumps.
- Ultra-soft thermoplastic elastomer tubing for peristaltic pumps and laboratory dispensing.
- Size: 3/8 in inner diameter, 5/8 in outer diameter, 1/8 in wall thickness.
- Length: 50 ft standard package length.
- Temperature range: remains flexible to -67°F (-55°C), maximum 125°F (52°C).
- Hardness: 40 Shore A for minimal compression resistance.
- Clear tubing for unobstructed visual monitoring of flow.
- Non-DEHP formulation and resistant to corrosive chemicals.
- Suitable for vent and drain lines, analytical instruments, and synthesis and research setups.
Accuflow Systems Saint-Gobain Tygon Tubing, 3/16 in, 1/16 in Wall, 50 ft
Tygon 2375 Ultra Chemical-Resistant tubing delivers clear, flexible thermoplastic elastomer construction engineered for compatibility with aggressive chemicals and cleaning agents. Supplied on a 50 ft roll, this tubing provides stable, phthalate-free fluid transfer suitable for laboratory, bioprocessing, and industrial applications.
- Clear thermoplastic elastomer tubing.
- 3/16 in inside diameter, 5/16 in outside diameter, 1/16 in wall.
- 50 ft roll length.
- Chemical resistant to acids, bases, ketones, salts, and alcohols.
- Phthalate-free, plasticizer-free construction to minimize fluid contamination.
- Maximum service temperature up to 130 °F.
- Typical working pressure approximately 30 psi; application dependent.
- Suitable for laboratory and process fluid transfer and chemical handling.
Accuflow Systems Saint-Gobain Tygon Tubing, B-44-3 PVC, 1/8 in, 50 ft
Tygon B-44-3 tubing from Saint-Gobain is a clear, flexible beverage-grade PVC tubing formulated for food and beverage transfer and dispensing. It provides glass-like transparency for visual monitoring, broad chemical resistance, and non-wetting properties for easy cleaning and complete drainage. Available in 1/8 in inside diameter with a 50 ft coil, the tubing is suitable for soft drinks, fruit juices, flavored teas, and bottled water.
- Clear as glass for easy visual monitoring of flow.
- 1/8 in inside diameter, 3/16 in outside diameter.
- 50 ft coil length for extended runs.
- PVC formulation, Shore A hardness 66.
- Maximum operating pressure 34 psi at 73°F (2.3 bar at 23°C).
- Temperature rating up to 165°F (74°C); brittle below -32°F (-36°C).
- Vacuum rating 25 in Hg at 73°F (635 mm at 23°C).
- Contains no BPA or phthalates.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP PVC, 3/8 in ID, 50 ft
Tygon E-3603 tubing is a crystal-clear, flexible thermoplastic tube formulated without DEHP for laboratory and medical fluid-transfer applications. It provides high clarity for visual inspection, consistent lot-to-lot performance, and mechanical properties suitable for peristaltic pumps, vacuum lines, and general laboratory use.
- 3/8 in (9.5 mm) inner diameter, 5/8 in (15.9 mm) outer diameter, 1/8 in (3.2 mm) wall thickness.
- 50 ft (15 m) packaged length.
- Non-DEHP, phthalate- and BPA-free PVC formulation.
- Shore A hardness 56, tensile strength 1750 psi, ultimate elongation 425%.
- Maximum recommended temperature 165 °F (74 °C); brittle temperature -51 °F (-46 °C).
- Maximum working pressure 25 psi at 73 °F; vacuum service to 29.9 inHg.
- Minimum bend radius 1-1/8 in (28.6 mm) for standard sizes.
- Smooth inner surface for low contamination and reliable fluid flow.
Accuflow Systems Saint-Gobain Tubing, PharMed BPT, 3/16 in ID, 25 ft
Saint-Gobain PharMed BPT tubing is a high-performance peristaltic pump tubing formulated for biocompatible fluid transfer in pharmaceutical, biotechnology, and diagnostic processes. It is engineered to withstand repeated peristaltic pumping, minimize particulate generation, and protect shear-sensitive fluids during transfer and processing.
- 3/16 in ID, 5/16 in OD, 1/16 in wall, 25 ft length.
- Proprietary peristaltic-grade formulation, opaque cream appearance.
- Meets USP <88> Class VI and ISO 10993-5 biocompatibility testing.
- Maximum service temperature 275°F (135°C); low temperature embrittlement -75°F (-59°C).
- Very good general chemical resistance; excellent resistance to acids, alkalis, and oxidizers.
- Compatible with repeated autoclaving and gamma irradiation up to 50 kGy.
- Suitable for cell harvest, bioreactor process lines, aseptic filling, and shear-sensitive fluid transfer.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 1/2 in ID, 25 ft
PharMed BPT thermoplastic tubing is formulated for peristaltic pump fluid transfer in medical, diagnostic, and laboratory systems. The tubing delivers extended flex life in roller pumps, low particulate generation, and broad chemical resistance while protecting light-sensitive fluids.
- 1/2 in inner diameter, 3/4 in outer diameter, 1/8 in wall, 25 ft length.
- Thermoplastic construction with low particulate spallation.
- Opaque to visible and UV light to protect light-sensitive fluids.
- Maximum service temperature 275 °F (135 °C); low-temperature embrittlement down to -75 °F (-59 °C).
- Resistant to acids, alkalis, and oxidizing agents.
- Suitable for repeated autoclave, CIP, and SIP cycles.
- Designed for extended flex life in peristaltic pumps.
- Compatible with medical and diagnostic applications; meets applicable FDA 21 CFR 177.2600, ISO 10993, and NSF 51 requirements.
Accuflow Systems Saint-Gobain Tygon Tubing, PVC, 1/8 In ID, 50 Ft
Saint-Gobain Tygon Power F-4040-A tubing is a flexible, fuel- and lubricant-resistant PVC tubing formulated to resist swelling and embrittlement from hydrocarbon-based fluids. Its translucent yellow construction allows visual monitoring of flow while providing UV and ozone resistance and easy routing for small engines, automotive, and equipment fluid-transfer applications.
- Fuel- and lubricant-resistant special PVC formulation
- 1/8 in inside diameter, 1/4 in outside diameter, 1/16 in wall
- 50 ft pre-cut length for inventory convenience
- Maximum working pressure 50 psi at 73°F
- Translucent yellow for fluid visibility and identification
- Resists swelling, hardening, and embrittlement from hydrocarbons
- Operating temperature up to 165°F (74°C), brittle to -35°F (-37°C)
- Highly flexible for tight-routing and easy installation
Accuflow Systems Saint-Gobain Silicone Stopper, 10.5 x 14.5 x 20.0 mm, 10/Pack
Silicone stopper for laboratory and bioprocess vessel sealing, supplied in packs of 10. Intended for use where a chemically inert, easily installed closure is required. Meets FDA/BGA standards as listed by distributor.
- Material: Silicone
- Dimensions: 10.5 x 14.5 x 20.0 mm (0.414 x 0.571 x 0.788 in)
- Quantity: 10 per pack
- Compliance: Meets FDA/BGA standards
- Application: Vessel sealing and closure in laboratory and bioprocess assemblies
Accuflow Systems Saint-Gobain Pump Tubing, Tygon XL-60, 1/8 in ID, TPE
Saint-Gobain Tygon XL-60 tubing is a long-life thermoplastic elastomer (TPE) formulated for peristaltic pump applications. It offers extended pump life compared with standard silicone or PVC tubing, remains flexible at low temperatures, and resists elevated operating temperatures.
- Material: thermoplastic elastomer (TPE), Shore A 60.
- Designed for peristaltic pump applications, long-life formulation.
- Internal diameter 1/8 in, outer diameter 1/4 in, wall thickness 1/16 in.
- Supplied in 50 ft lengths.
- Temperature range -40°F to 250°F (maximum recommended 250°F / 121°C).
- Pump life exceeding 500 hours under typical operating conditions.
Accuflow Systems Saint-Gobain Tygon Tubing, Medical, 1/32 in ID, 3/32 in OD
Tygon S-50-HL medical tubing is a hemocompatible, flexible tubing formulation developed for blood-contact medical applications and procedures requiring reliable peristaltic pump performance. The tubing provides clear flow visualization, USP Class VI biocompatibility, and established use in bypass and surgical applications.
- Hemocompatible tubing suitable for blood-contact applications and bypass procedures.
- Meets USP Class VI biocompatibility; passes hemocompatibility testing.
- Compatible with peristaltic pumps for consistent flow and low mechanical wear.
- Dimensions: 1/32 in ID, 3/32 in OD, 50 ft coil.
- Clear, flexible compound for visual monitoring and reliable durability.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP, 1/8 in ID, 50 ft
Clear, biocompatible medical-grade thermoplastic tubing formulated without DEHP for blood-contact and medical fluid handling. Bondable and weldable, it resists common sterilization methods and minimizes hold-up volume for accurate fluid transfer in peristaltic pumps and IV systems.
- Biocompatible non-DEHP polymer, suitable for blood contact.
- Inner diameter 1/8 in (0.125 in / 3.18 mm), outer diameter 3/16 in (0.188 in / 4.76 mm).
- Nominal wall thickness 1/32 in, 50 ft standard package length.
- Crystal clear for easy visualization of fluid flow.
- Compatible with autoclave, EtO, and gamma sterilization methods.
- Maximum recommended operating temperature 165°F (74°C).
- Typical applications: blood and IV solutions, dialysis, drug delivery, diagnostic equipment, and respiratory therapy.
Accuflow Systems Saint-Gobain Tygon Tubing, 1/4 in I.D., 50 ft, Textile Reinforced
Saint-Gobain Tygon 2475 I.B. high-pressure thermoplastic tubing, 1/4 in I.D. x 1/2 in O.D., 50 ft pack, combines textile-braid reinforcement and a smooth, low-sorption inner surface for reliable, high-purity fluid transfer. Formulated without added plasticizers and with clear construction, it supports applications requiring low extractables, visual inspection, and elevated working pressures.
- Textile-braid reinforcement for elevated working pressures.
- No added plasticizers to minimize extractables.
- Low-wetting, ultra-smooth inner surface to reduce sorption and microbial buildup.
- Clear construction allows visual inspection of fluid path.
- Dimensions: 1/4 in I.D., 1/2 in O.D., 50 ft pack length.
- Lower gas permeation than standard silicone tubing.
Accuflow Systems Saint-Gobain Tygon Tubing, Fuel and Lubricant, 3/8 in, 50 ft
Tygon F-4040-A fuel and lubricant tubing from Saint-Gobain is a flexible, hydrocarbon-resistant tubing formulation designed for small engine fuel lines and lubricant transfer. The tubing resists swelling and hardening caused by fuels and industrial lubricants, remains flexible at low temperatures, and is translucent yellow for visual identification and flow monitoring.
- 3/8 in inside diameter, 1/2 in outside diameter, 1/16 in wall thickness.
- 50 ft package length for bulk installations.
- Translucent yellow for positive identification and flow monitoring.
- Formulation resists swelling and hardening from hydrocarbon exposure.
- Hardness approximately 57 Shore A for flexible performance.
- Maximum recommended operating temperature 165 °F (74 °C); brittleness by impact -35 °F (-37 °C).
- Minimum bend radius 1-7/8 in; working pressure 20 psi at 73 °F; vacuum rating 10.0 inHg at 73 °F.
Accuflow Systems Saint-Gobain Tygon Tubing, Food-Grade, 1/4 in ID, 1/2 in OD
Saint-Gobain Tygon B-44-4X tubing is a food-grade flexible transfer tubing designed for dairy, food, and beverage applications. It features a smooth, non-porous bore and is formulated to resist harsh alkaline cleaners and sanitizers, making it suitable for hygienic processing and dispensing systems.
- Clear, smooth, non-porous bore inhibits particle entrapment and bacterial growth.
- Resistant to harsh alkaline cleaners and sanitizers.
- Contains no BPA or phthalates.
- Working pressure 60 psi (4.1 bar) at 73°F (23°C).
- Vacuum rating 29.9 inHg (760 mmHg) at 73°F (23°C).
- Maximum recommended operating temperature 165°F (74°C).
- Durometer hardness Shore A 66, tensile strength 2,200 psi, ultimate elongation 390%.
- Complies with FDA food additive regulations, NSF-51, NSF-61, 3-A, Japan Food Sanitation Law #370/1959, REACH, and EU 1935/2004/EC.